manualshive.com logo in svg

Kugelmann Maschinenbau KS 1200, Operating Instructions Manual

Share
Download
Kugelmann Maschinenbau KS 1200 Operating Instructions Manual Download Page 23

//

 

ORIGINAL OPERATING INSTRUCTIONS

 

Safety instructions

27.06.2018

23/79

6.3

Use

Danger

Carrying persons on the sweeping suction combination.
Risk of serious injury or death.

•

Do not carry persons on the sweeping suction combination!

Warning

Persons present in working range of sweeping suction combination.
Risk of serious injury or death.

•

Do not stay in the working range of the sweeping suction combination!

Warning

Careless start-up.
Risk of serious injury or death.

•

Before starting up the sweeping suction combination or during operation, check
the area near the sweeping suction combination!

•

Ensure sufficient visibility!

•

Start the vehicle only with no person or good in the surroundings of the vehicle!

•

Before starting the vehicle, make sure that the sweeping suction combination is
correctly attached and secured!

Warning

Changed handling and braking behavior.
Risk of serious injury or death.

•

Please adjust your driving behavior to the dimensions and the additional weight
of the sweeping suction combination!

•

Adjust the driving speed to the road conditions as well as to road and traffic
environment!

Summary of Contents for KS 1200
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands