6
Info
It shows the device’s software vision
Test
V15-11
Fixture
V1 -2
5.
Menu Description
LCD DISPLAY
Menu
Up
Enter Down
When you press the “Model” button, it will give you some information to choose.
DMX ADD.: Set DMX address
Push the UP or DOWN to choose the DMX Address from 001-512,or 512-001, and push ENTER
to confirm.
This function is used to set or adjust the fixture’s starting DMX address.
Every device controlled by DMX has to have a unique starting
address. The addressing feature is what allows DMX to function properly.
The DMX address of a fixture is what allows it to communicate with a controller properly.
Channel: Choose the different channels
This function allows you to choose the DMX Channel, there are 4 kinds of DMX Channels:
3DMX Channel,6 DMX Channel ,9DMX Channel and 18CH,the UP or DOWN button to choose
the mode, and push ENTER to confirm.
Auto Run.
You can choose different Auto-run Model from 00 to 20, each number has represented one effect,
when you have made a choice of one, press the ENTER button to choose its speed, push the UP or
DOWN button to lift the speed of strobe running.
Sound: Sound Control Mode
This function allows the light under sound control, the light could work by sound to create
different effect.
PS: This mode is on the condition of Auto-run Mode.
The sensitivity adjustment of the strobe could be from 001-255, push the UP or DOWN to add the
level of sensitivity to the device.
PS: 001 is the highest one, on the opposite, 255 is the lowest.