Kudux PIXEL ZOOM 285, User Manual, Page: 5 / 17

WWW.KUDUX.COM 5
•
The highest temperature is 40 ° C when the equipment is in stable state.
•
The equipment cannot have an obstacle at least in the range of 0.5 meters.
•
Do not replace the non-original parts.
2.
Package
2.1. Attachment
PIXEL ZOOM 285 packed with fly-case of one in one, two in one, or carton box, attach follow
accessory:
CONTENT QUANTITY
USER MANUL 1 piece
CLAMP (option) 2 pcs
SIGNAL CABLE 1 piece
2.2. Transport protect lock
To protect the light, there is a protect lock; During the transport, the lock will have closed
keeping the item in safety state.
2.3. About pack stage
1. Before packed, make sure power is off, and wait for at least 20mins for cooling down.
2. Before cleaning the fixture, make sure X, Y axis protect lock closed.
3. After packed by plastic bag, high-lift the fixture with two handles besides the product. put
the product into the fly-case up-side-down.
4. After packed the product, put the accessory into the accessory case, then closed and lock
the fly-case.
5. Fly-case only up stacked two layers. Prohibited upside down
6. When packed with carton box, equipment should be put into the foam first, then set into a
carton, pay attention to the vertical position.
2.4. Unpacking
Note: Before unpacking check the damage is whether due to the transportation or not, if you
find any such damage, please do not use this item, and contact with the dealer or
manufacturer as soon as possible.
•
Open the fly-case, and discover the inside plastic bag.
•
High-lift the product by two handles beside the bottom base and move it out.
•
Before power on, make sure you have opened the X, Y axis lock!