MAINTENANCE
WARNING
Before servicing or cleaning unit, switch power off at service panel and lock in access to prevent it being switched on
accidentally. If the power panel can not be locked, put a prominent warning device, such as a brightly coloured label.
Grease filters
The grease filters should be cleaned once a month or as needed. To remove grease filter, pull the metal latch down. This will
disengage the filter hood. Tilt the filter down, then remove. To clean the filters, use a solution of warm water and detergent.
Let them dry, then reinstall. The metal filters are dishwasher-safe. Clean filters made entirely of metal in the dishwasher usi
a non-phosphate detergent. Using a detergent containing phosphates and local water conditions may cause discoloration of
the filters, without affecting their performance. This discoloration is not covered under warranty.
Hood Cleaning
Cleaning stainless steel: how to keep his "lustrous appearance" and help prevent corrosion.
What to do:
- Wash surfaces regularly with a cloth or a clean cloth soaked in warm water and mild soap or dish detergent.
- Always clean in the direction of squall lines (direction of the grain).
- Always rinse well with clear water (2 or 3 times) after cleaning and dry completely.
- A household cleaner designed for stainless steel can also be used.
Don'ts:
- Use steel wool or stainless steel or any other scrapers to remove stubborn dirt.
- Use any harsh or abrasive cleansers.
- Allow dirt to accumulate.
- Allow the plaster dust or any other construction residues reach the hood. Cover the hood while working to ensure no dust
hood.
To avoid when choosing a detergent
- Any cleaners that contain bleach, because they attack stainless steel.
- Any product containing chloride, fluoride, iodide, bromide, they quickly deteriorate surfaces.
- Any combustible products used for cleaning such as acetone, alcohol, ether, benzene, etc.These products are highly
explosive and should never be used near a stove.
To replace the bulbs:
1. Shut off the power
2. Take off the grease filters, press both sides of the elastic clamps on the bulb, make which loose.
3.Gently push outward, take out the bulbs.
P.S: If necessary, wear gloves when taking out the bulbs.
FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE
WWW.KUCHT.COM
INSTALLATION GUIDE AND USER MANUAL
