Kucht K7740D User Manual Download Page 7

       

Heating Dry

When the

"

Heating Dry

"

 function is selected, the 

heater will work during the drying process.

      

 

Start/Cancel

Select the 

washing program or pause the washing 

program when the machine is working.

       Display window

This displays the remained hours and minutes of the 

running cycle, delay hours and error codes etc.

      

 Delay

To delay the start of a selected cycle, press the 

Delay Start pad until the desired delay time shows 

in the LED display. You can delay the start for 1 to 

24 hours. To cancel the delay start option before the 

delay period is over, press the Start/Cancel pad for 

3-5 seconds. 

Control panel

1.Wash Cycle Selections

      

 Heavy

This cycle is for hard-to-clean, heavily soiled

dishes, pots, pans, and dishes.

       

Normal 

.

It is for regularly 

This is standard programme 

soiled dinner dishes or silverware.

        ECO

It is suitable to clean normally soiled tableware 

and it is the most efficient programme in terms 

of it’s combined energy and water consumption 

for that type of tableware.

       

Glass

For lightly soiled loads, such as glasses, crystal 

and fine china.

       

Rapid

A shorter wash for lightly soiled loads that do not

need drying.

       

Rinse

Use for rinsing dishes glasses and silverware that 

will not be wash right away.

       

Sanitize

"

"

When the Sanitize function is selected, the 

temperature of water will be maintained at 

(15

) max. The max temperature may 

69

6

.

2

not be reached if the incoming water temperature 

is not correct. Certified residential dishwashers 

are not intended for licensed food establishments.

Warning: The sanitize option is available with

"

" " N

" and "

" cycles.

Heavy

omal

Light

       

Hi Temp

"

"

When the Hi Temp wash function is selected, 

the temperature of the water will be maintained 

at 60 (140 ) max.

5

2.Options

3.Functions

4.Cycle progress indicator

Located on ride side of the front of the dishwasher , 

these lights indicate how far along is the current 

wash cycle while the dishwasher is running.

Pre

-

wash 

Main

-

wash

 

Rinse

 

Drying

When the dishwasher is in a Pre-wash portion of 

the cycle, the Pre-wash lights are illuminated.

 

When the dishwasher is in a Main-wash portion 

of the cycle, the Main-wash lights are illuminated 

 

When the dishwasher is in a Rinse portion of the 

cycle, the Rinse lights are illuminated. 

 

When the dishwasher is in a Drying portion of the 

cycle, the Drying lights are illuminated, the 

Drying lights will turn off after the cycle is ended. 

 

FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE 

WWW.KUCHT.COM

Summary of Contents for K7740D





















Reviews: