Kubota WSM L3560, Workshop Manual

Page: 109 / 801

GENERAL
L3560, L4060, L4760, L5060, L5460, L6060, WSM
G-80
10. IMPLEMENT LIMITATIONS
The KUBOTA Tractor has been thoroughly tested for proper performance with implements sold or approved by
KUBOTA. Use with implements which exceed the maximum specifications listed below, or which are otherwise unfit
for use with the KUBOTA Tractor may result in malfunctions or failures of the tractor, damage to other property and
injury to the operator or others. [Any malfunctions or failures of the tractor resulting from use with improper implements
are not covered by the warranty.]
NOTE
• Implement size may vary depending on soil operating conditions.
9Y1210824GEG0129US0
Tread (max. width)
Lower link end max.
loading weight W0
Front Rear
L3560
1155 mm (45.5 in.)
1480 mm (58.3 in.) 1700 kg (3750 lbs)
L4060
1530 mm (60.2 in.)
1750 kg (3860 lbs) L4760 1300 mm (51.2 in.)
L5060, L5460, L6060 1340 mm (52.8 in.) 1430 mm (56.3 in.)
Actual figures
Implement weight W1
and / or size
Max. Drawbar Load W2
Trailer loading weight
W3 Max. capacity
L3560
As in the following list
(Shown on the next pate)
650 kg (1430 lbs)
2000 kg (4400 lbs)
L4060 2500 kg (5500 lbs)
L4760, L5060
L5460, L6060
3000 kg (6600 lbs)
Lower link end max. hydraulic lift capacity:
W0
Implement weight: The implement weight which you can put on the link:
W1
Max. drawbar load:
W2
Trailer loading weight: The max loading weight for trailer (without trailer weight):
W3
KiSC issued 03, 2016 A