Kubota WSM L3560, Workshop Manual

Page: 102 / 801

GENERAL
L3560, L4060, L4760, L5060, L5460, L6060, WSM
G-73
9. TIRES
[1] TIRES
CAUTION
To avoid personal injury:
• Do not attempt to mount a tire on a rim. This should be done by a qualified person with the proper
equipment.
• Always maintain the correct tire pressure.
Do not inflate tires above the recommended pressure shown in the operator's manual.
IMPORTANT
• Do not use tires other than those approved by KUBOTA.
9Y1210824GEG0117US0
Inflation Pressure
Though the tire pressure is factory-set to the prescribed level, it
naturally drops slowly in the course of time. Thus, check it everyday
and inflate as necessary.
NOTE
• Maintain the maximum pressure in front tires, if using a
front loader or when equipped with a full load of front
weights.
9Y1210824GEG0118US0
Tire sizes Inflation pressure
Rear
12.4-24, 4PR 140 kPa (1.4 kgf/cm
2
, 20 psi)
14.9-24, 4PR 140 kPa (1.4 kgf/cm
2
, 20 psi)
14.9-26, 4PR 140 kPa (1.4 kgf/cm
2
, 20 psi)
355/80-D20, 4PR 100 kPa (1.0 kgf/cm
2
, 14 psi)
44 × 18-20, 6PR 170 kPa (1.7 kgf/cm
2
, 24 psi)
Front
7.2-16, 4PR 150 kPa (1.5 kgf/cm
2
, 22 psi)
8.3-16, 4PR 150 kPa (1.5 kgf/cm
2
, 22 psi)
9.5-16, 4PR 205 kPa (2.1 kgf/cm
2
, 30 psi)
27 × 8.50-15, 4PR 85 kPa (8.5 kgf/cm
2
, 12 psi)
29 × 12.50-15, 4PR 140 kPa (1.4 kgf/cm
2
, 20 psi)
KiSC issued 03, 2016 A