Kubota U50-5, Operating Instructions Manual

Page: 39 / 236

Recovery, loading and transport
W9272-8135-1
37
05/2020
RECOVERY, LOADING AND TRANSPORT
Safety rules for recovery

For recovery of the machine, a towing vehicle of at least the same weight class as the machine must be used.

A tow bar must be used for the recovery. If a tow rope is used, an additional vehicle to brake the machine
must also be attached. The tow bar or tow rope must be suitable for the recovery of the machine in respect
of the towed load. Do not use damaged recovery aids.

Do not step into the danger zone between the vehicles during the recovery procedure. If a tow rope is used,
keep a distance of at least 1.5 times the length of the rope.

Use the towing eye on the track frame for the recovery.

The above safety rules also apply if the machine is used as the towing or recovery vehicle.

Observe the admissible values for the towed load and the maximum pressing load vertical down on the towing
eye during recovery, see „Specifications“ (page 46).
Safety rules while loading with a crane

Crane and lifting gear must be suited for the absorption of the load to be lifted and be approved.

Before the use of the crane and the lifting gear, make sure that the specified safety inspections at regular in-
tervals have been carried out and that the crane and lifting gear are in good working order and impeccable
condition.

The machine may only be lifted at the points provided. Lifting from the cab roof is prohibited as this can cause
severe damage.

Never attach a crane hook to the lower edge of the dozer! The crane hook can slip off sideways while lifting
and the machine may fall off.

Always adhere to the valid safety regulations for the lifting of loads.

The machine must be secured with a holding rope when it is being lifted.

The crane operator is responsible for the observance of these safety rules.