Kubota U50-5, Operating Instructions Manual

Page: 33 / 236

Safety rules
W9272-8135-1
31
05/2020
Protective structure cab
Cab was constructed in accordance with current safety standards and tested for verification as:
To ensure greatest protection by means of this protective structure, the following applies:

Never operate the machine with a higher operating weight than
the maximum permissible total weight indicated on the ROPS
identification plate (1).

The seat belt must be fastened while the machine is being op-
erated.

Do not make any structural changes to the protective structure.

In the event of damage, please contact your KUBOTA dealer.
(Do not repair!)

Never operate the machine without the protective structure.
When using a hydraulic hammer or other attachment for demolition work where material (e.g. asphalt) is removed
and can uncontrollably sputter away, a gravel guard is recommended for protection.
Emergency hammer
In case of an accident where the machine cab door and windows
can not be opened, the operator can break the window panes with
the emergency hammer (1).
The machine is equipped with a protective structure that protects the operator from severe injury or
death if the machine falls over or overturns and in the case of falling objects.
Roll-over protection ROPS (Roll-Over Protective Structure)
Protective structure against falling objects FOPS (Falling-Object Protective Structure)
If a front protective grille or a roof protective grille is required, a KUBOTA gravel guard (optional) can
be installed.
When breaking the window pane, close your eyes and
cover them with an arm.
1 1
KX060-05_007
STOP