Kubota U50-5, Operating Instructions Manual

Page: 200 / 236

198
W9272-8135-1
05/2020
Maintenance

Remove the return filter (5) with rod (7).

Loosen the screw (6).

Remove the return filter and replace it with a new one.

Tighten the screw (6).

Check the condition of the sealing ring of the hydraulic oil tank cover. Replace if necessary.

Insert the return filter with rod.

Screw on the hydraulic oil tank cover.

Close the side cover.
Tank breather filter - change

Open the side cover (page 155).

Unscrew the cap nut (1).

Push the button (2) to release pressure.

Unscrew the nut (3) and remove the cover (4).

Take the breather filter (5) out of the hydraulic tank cover and
replace it with a new one.

Tighten the cover (4) and the nut (3) and install the cap nut (1).

Close the side cover.
Dispose of cleaning cloths and the old filter element in
accordance with applicable environmental protection
regulations.
Pay attention to utmost cleanliness when servicing the hydraulic system.
Risk of injury by hot pressurized hydraulic oil! This service may only be carried out after the hydraulic
oil has cooled down. Then release pressure.
Dispose of cleaning cloths and the old filter element in
accordance with applicable environmental protection
regulations.
7 7
6 6
5 5
STOP
KX060-05_139
1 1
3 3
2 2
4 4
5 5