Kubota U50-5, Operating Instructions Manual

Page: 13 / 236

General information
W9272-8135-1
11
05/2020
EC declaration of conformity radio equipment-manufacturer
Hereby, ASAHI DENSO CO., LTD. declares that the radio equipment type [CZ106] is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:

http://en.ad-asahidenso.co.jp/euro-compliance/
Date of issue of the operating instructions
The date of issue of the operating instructions is printed on the bottom right of the front page of the book.
Operating personnel
The duties of personnel with respect to operation, servicing, repairs and safety inspections must be set forth clearly
by the owner.
Personnel in training are allowed to work on or with the machine only under the supervision of an experienced
operator.
Operator
According to industrial safety regulations, only persons who were instructed in the operation of the machine, who
have proven their qualification to the owner (employer) and who can be expected to perform their duties in a reli-
able way are allowed to operate the machine independently.
Only instructed personnel are allowed to start the machine and operate the controls.
Trained personnel
Trained personnel are skilled persons with a technical qualification who are able to determine damages to the ma-
chine and perform repairs in their area of qualification (e.g. hydraulic or electrical engineering).
Only trained and instructed personnel are allowed to work on the machine.
Qualified personnel
Based on their technical training and experience in their field, qualified personnel should have sufficient knowledge
about the technology used in this machine and be familiar with the applicable national work safety regulations,
accident prevention regulations and the generally accepted technical rules so that they can assess the safe con-
dition of the machine.