Kubota U35-4, Operator'S Manual

Page: 93 / 120

71 REGULAR CHECKS AND MAINTENANCE WORK
EVERY 500 SERVICE HOURS
Do all 50, 100 and 250 hour servicing at the same time.
B
Drive unit Oil Change(First Oil Change of
the 50 hours)
To avoid personal injury or death:
A
Lower all attachments to the ground, stop the
engine and remove the key before undertaking
the oil change.
1. Rotate the track so that the drain plug of the drive unit
is in the bottom position.
2. Remove the drain plug to let the oil run out. Screw in
and tighten the drain plug again and fill with gear oil
through the oil check port.
3. Fill oil until it overflows out of the oil check port.
Oil change
- first oil change after 50 hrs
- then every 500 hrs
- or at least once a year
4. Use prescribed gear oil SAE 90.
B
Replacing Fuel Filter Cartridge
To avoid personal injury or death:
A
Keep fire away.
1. Remove the filter with the filter wrench.
2. Apply a light film of fuel to the seal of the new filter and
turn in tightly by hand.
3. Open the shutoff-valve of the fuel filter again.
A
After exchange of the filter, the fuel system must be
purged of air.
(1) Oil check port
(2) Drain plug
(3) Oil filling port
Gear oil volume approx. 0.6 L
(1) Fuel filter cartridge