Additional equipment
72
Additional equipment
You can purchase additional equipment through your dealer.
Tine saver
If tines are broken, the tine savers can prevent the broken-off part from
being lost. Broken-off tine parts in the crop may damage machines
that are following behind.
•
The flexible plastic holders can be easily attached and released
again.
•
One tine saver is required for each tine.
For a good crop pickup, both tine legs must be parallel after fitting the
tine saver.
If the tine saver is overtightened, the tine legs become splayed.
Night swath gear
box
A night swath gear box is available in order to use the rotary tedder to
lay down night swaths for the hay harvest. The night swath gear box
reduces the speed of the PTO shaft. The crop is not spread but
deposited between two rotors as a swath.
Remove the existing protective pot.
Slide the night swath gear box with the protective pot onto the inter-
mediate shaft and secure it with a circlip.
Secure the night swath gear box with the clamping bolt.
Fit the PTO shaft on the side shaft end.
Anti-wrapping
plate
The anti-wrapping plate ensures a perfect, uniform fodder flow. It
stops the fodder getting wrapped around the running wheel axles.
The anti-wrapping plates are fitted to the running wheel axles in the
work position, as shown.
Tine saver
Night swath gear box
Protective pot
Anti-wrapping plate
Direction of travel
