background image

28

OPERATION OF THE ENGINE

OPERATION OF THE ENGINE

To avoid personal injury or death:

A

To avoid the danger of exhaust fume
poisoning, do not operate the machine in a
closed building without proper ventilation.

A

Always start the engine from the operator's
seat. Do not start the engine while standing
next to the machine. Before starting the engine,
sound the horn to get the attention of persons
standing nearby. 

A

Do not use starting fluid or ether.

A

In order not to overload the battery and starter, avoid
start-ups of more than 10 sec.

A

When engine does not start in 10 sec., please wait 20
sec. or more, before attempting to restart.

STARTING THE ENGINE

To avoid personal injury or death:

A

The operator should not depend solely on the
warning lamps, but should always conduct the
routine checks section (see "MAINTENANCE"
section).

Start the engine in the following manner:

1. Before starting the engine, make sure that the

armrests are in the "Raised" position and the control
levers and pedal are in their neutral position and the
seat belt is fastened correctly.

2. Set the engine speed control dial to 1/2 position and

keep the accelerator pedal free.

(1) Horn switch

(1) Left control (traveling) lever
(2) Right control (front operating) lever
(3) Armrest
(4) Engine speed control dial

(1) Engine speed control dial
(2) Accelerator pedal

Summary of Contents for SSV65






























































































































Reviews: