Kubota RTV520 Operator'S Manual Download Page 50 | Manualshive

Page: 50 / 96

background image

TOWING AND TRANSPORTING

TOWING AND TRANSPORTING

1. Rear trailer hitch (if equipped)

WARNING

To avoid serious injury or death:

• Always tow a load slowly enough to maintain

control and avoid tipping.

• To provide adequate braking ability and

traction, do not tow a load if the vehicle cargo
bed is loaded or attachment is installed.

• Attach a trailer to the trailer hitch only.

Details regarding the rear trailer hitch load can be
found in a different section.
(See VEHICLE LIMITATIONS on page 22.)
When towing other equipment, use a safety chain.

(1) Rear trailer hitch (if equipped)
(2) Hitch pin (if equipped)
(3) Hole for connecting a safety chain (if equipped)

2. Front trailer hitch (if equipped)

WARNING

To avoid serious injury or death:

• Do not tow with this vehicle unless all the

functions of the vehicle are properly working,
since the malfunction of steering operation or
braking may cause an accident.

Use the front trailer hitch for greater maneuverability in
confined areas such as a barn.
Details regarding the front trailer hitch load can be
found in a different section.
(See VEHICLE LIMITATIONS on page 22.)

(1) Front trailer hitch (if equipped)
(2) Hitch pin (if equipped)

3. Winch mount bracket (if equipped)

When mounting the optional winch, install the optional
winch mount bracket.
Mounting the optional winch always requires reading
the instruction manual attached to the winch thoroughly
before using it.

(1) Winch mount bracket

4. Transporting the vehicle safely

Pay attention to the following points when transporting
the vehicle.

1. Use a suitable truck or trailer.
2. Apply the parking brake and place chocks against

the front and rear tires.

TOWING AND TRANSPORTING

TOWING AND TRANSPORTING

46

RTV520

«
...
48
49
50
51
52
...
»

Summary of Contents for RTV520

































































































Reviews:

No comments

Related manuals for RTV520

Brand: Polaris Pages: 147

Brand: MANCO Pages: 4

GROUND FORCE ELITE

Brand: Razor Pages: 16

Brand: Makita Pages: 128

Brand: Craftsman Pages: 56

Brand: Panther Pages: 10

Brand: Krone Pages: 128

Brand: Krone Pages: 192

Roketa ATV-08L-90

Brand: Scooter Dynasty Pages: 12

Brand: GSMOON Pages: 49

Express L6 - Gas

Brand: E-Z-GO Pages: 80

Brand: Baja Pages: 55

Brand: Panasonic Pages: 392

Brand: EBO Pages: 19

Brand: Futura Pages: 24

Phazer PZ50X 2008

Brand: Yamaha Pages: 212

Wolverine YFM35XY

Brand: Yamaha Pages: 150

Brand: ROSSO MOTORS Pages: 17

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands