GENERAL
RTV1140CPX, WSM
G-16
Checking Engine Oil Level
CAUTION
• Be sure to stop the engine before checking the oil level.
1. Park the machine on a flat surface.
2. Check engine oil before starting the engine or 5 minutes or more
after the engine has stopped.
3. To check the oil level, draw out the dipstick, wipe it clean,
replace it, and draw it out again. Check to see that the oil level
lies between the two notches.
If the level is too low, add new oil to the prescribed level at the
dipstick.
IMPORTANT
• When using an oil of different maker or viscosity from the
previous one, remove all of the old oil.
Never mix two different types of oil.
• If oil level is low, do not run engine.
9Y1210293GEG0008US0
Checking Hydraulic Tank Oil Level
1. Park the vehicle on a flat surface.
2. Stop the engine and remove the key.
3. Tilt the seat.
4. To check the oil level, remove the dipstick, wipe it clean, screw
it into filling hole and remove dipstick again.
If the level is too low, add new oil to the prescribed level at the
filling plug with dipstick (1). (See page G-8.)
IMPORTANT
• If oil level is low, do not run engine.
9Y1210293GEG0009US0
Checking Transmission Fluid Level
1. Park the machine on a flat surface, lower the implement and
shut off engine.
2. To check the oil level, draw out the dipstick, wipe it clean,
replace it, and draw it out again. Check to see that the oil level
lies between the two notches.
If the level is too low, add new oil to the prescribed level at the
dipstick (2). (See page G-8.)
IMPORTANT
• If oil level is low, do not run engine.
9Y1210293GEG0010US0
Engine oil capacity
Oil filter exchanged
4.1 L
4.3 U.S.qts
3.6 Imp.qts
Oil filter
non-exchanged
3.8 L
4.0 U.S.qts
3.3 Imp.qts
(1) Oil Inlet
(2) Dipstick
A: Oil level is acceptable within this
range.
(1) Filling Plug with Dipstick
A: Oil level is acceptable within this
range.
Transmission oil capacity
11 L
2.9 U.S.gals
2.4 Imp.gals
(1) Oil Inlet
(2) Dipstick
A: Oil level is acceptable within this
range.
KiSC issued 05, 2014 A
Summary of Contents for RTV1140CPX
