Kubota RTV1140 CPX, Operator'S Manual

Page: 54 / 104

SEATING AND CARGO BED 32
8. Flip up front panel and insert stoppers into the slit on
both sides.
9. Release pins on both sides and insert into the holes
securely.
C 1 row seating to 2 row seating
Reverse above procedure.
B
Cargo Bed Tailgate
To avoid personal injury:
A
Do not apply a load to the tailgate while the
tailgate is open, or the wire loop may break.
A
Do not place fingers or hands between the
tailgate and the arm (latch) when closing, or
fingers or hands may be pinched.
For loading and unloading, the tailgate of the cargo bed
can be opened.
The tailgate is held level to the cargo bed floor with wire
loops.
Do not move the vehicle with the tailgate fully lowered.
In a fully lowered position, the tailgate may obstruct the
vehicle tail lamps and damage them by swinging motion.
1. Raise the arms (latch) at each end of the tailgate and
open the tailgate.
2. Close the tailgate by lifting it and pushing it firmly
closed. Push the arms (latch) down to make sure the
latches stay securely closed.
(1) Front panel
(2) Stopper
(3) Slit
(4) Pin (A) "RELEASE"
(1) Tailgate (2) Arm (latch) (3) Wire loop