Kubota RTV-X900G, Operator'S Manual

Page: 47 / 126

25 OPERATING THE VEHICLE
ENGLISH
B
Tilt Steering Wheel
[if equipped]
Adjust the steering wheel to proper position. The steering
wheel can be adjusted while the tilt lever is pulled.
B
Head Light Switch
The head light switch is operative when the key switch is
in either the "ON" or "OFF" position.
A
Turning the head light switch to the "low beam" or
''high beam'' position causes the following lamps to
light simultaneously.
(1) Tail and number plate lights (lamps at the rear
portions of the vehicle)
(2) Sidemarker light
(3) Lamp built in the hazard light switch
A
The head light switch is operative when the key switch
is in the "ON" position.
3. Adjust steering position.
(1) Tilt lever (P) "PULL"
4. Selecting light switch position.
(1) Head light switch (A) Head lights "OFF"
(B) Head lights dimmed, low beam
(C) Head lights, high beam