Kubota RTV 900, Operator'S Manual, Page: 65 / 108

45 PERIODIC SERVICE
HOW TO RAISE THE CARGO BED
To avoid personal injury:
A
When servicing under raised bed, make sure
safety support is properly mounted.
A
Do not touch muffler or exhaust pipes while
they are hot; Severe burns could result.
B
Raising and Lowering the Cargo Bed [if
equipped with hydraulic dump]
C
To raise the cargo bed
1. Apply the parking brake and start the engine.
2. Release the restricting plate.
3. Pull up the hydraulic lift cylinder lever to raise the
cargo bed.
4. When the cargo bed has been raised, return the lever
to the "NEUTRAL" position.
5. Stop the engine.
6. Mount the safety support.
C
To lower the cargo bed
1. Start the engine and then lift the bed slightly by
operating the lever.
2. Remove the safety support and store it in the given
location.
3. Lower the lever to the "DOWN" position to lower the
bed.
4. After making sure that the bed has lowered to the
lowest position, return the lever to the "NEUTRAL"
position and lock it by the restricting plate.
A
To raise or lower the cargo bed when the engine does
not start or the hydraulics are not operating, shift the
lever to the "FLOAT" position and raise or lower the
bed manually.
(1) Hydraulic lift cylinder lever
(if equipped)
(2) Restricting plate (if equipped)
(3) Knob bolt (if equipped) (A) "UP"
(N) "NEUTRAL"
(B) "DOWN"
(C) "FLOAT with Detent"
(1) Safety support