Operation
73
Adjusting the
swath width
By extending the rotors, the swath width can be adjusted to suit the
crop volume and the swath type using the double-acting hydraulic
control device on the tractor.
For adjustment of the swath width, the machine should be in the
headland position. Otherwise, the machine may be damaged.
Raise the machine into the headland position using the single-
acting hydraulic control device in the tractor.
Use the double-acting hydraulic control device on the tractor to
increase the pressure in order to extend the swath width.
Use the double-acting hydraulic control device on the tractor to
decrease the pressure in order to reduce the swath width.
Driving on
headlands
The rotors can be raised for crossing swaths that have already been
harvested.
Raise the machine into the headland position using the single-
acting hydraulic control device in the tractor.
Lower the rotor again, in order to create new swath.
Summary of Contents for RA2584
Page 98: ...EC Conformity Declaration 98 ...
