Preparing for use
46
Adjust the rotor pitch for
a single axle
It is possible to alter the position of the rotors lateral to the direction of
travel.
Release the four bolts slightly.
Push the wheel carriers into the required position (see illustration
on page 45).
Retighten the bolts.
Adjust the rotor pitch
for a tandem axle [+]
It is possible to alter the position of the rotors lateral to the direction of
travel.
Release the four bolts slightly.
Push the wheel carriers into the required position (see illustration
on page 45).
Retighten the bolts.
4 M12 bolts to 85 Nm
4 M12 bolts to 85 Nm
20 mm
20 mm
Tines
Collecting the crop increases
the distance between the
tines and the ground.
0 mm
0 mm
Summary of Contents for RA2584
Page 98: ...EC Conformity Declaration 98 ...
