manualshive.com logo in svg

Kubota RA2584, Operator'S Manual

Share
Download
Kubota RA2584 Operator'S Manual Download Page 22

Getting to know the machine

22

Getting to know the machine

Range of 

application 

This product is classified as replaceable equipment in accordance 
with EC directive 2006/42/EC. 
The machine is a twin rotor swather, which is suitable only for the 
raking together of mowed stalk-type vegetation (for example, hay or 
straw). 

Proper use

Any other use, for example, for silo distribution, any form of soil prep-
aration, road sweeping or for the transmission of power to other 
machines, is not permitted. The manufacturer and dealers are not 
liable for damage caused by improper use. The risk is borne solely by 
the user.

Features

Flexible in operation

This central rake, which has a working width of approximately 8.40 
metres, meets all the requirements of modern crop harvesting engi-
neering. All the important functions for field use are controlled during 
operation. The following functions can be set:

•

Deposit of crop in single rotor operation via the hydraulic single lift.

•

Individual working depth of both rotors. 

•

Swath width.

The rake can be pulled by tractors of 40 kW (56 hp) or more.

Extensive equipment

The machine is equipped with low-maintenance gearboxes and 11 
arms on each rotor. The offset tines provide excellent raking quality. 

The “TerraLink” support ensures outstanding adjustment to the 
contours of the land.

The swath former swivels into the selected transport or work position.

Easy changeover from work to transport position

The swather is easily changed over from the work to the transport 
position. Hydraulic cylinders lift the rotors into the transport position to 
maintain the transport width of less than 2.80 m.

Summary of Contents for RA2584





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands