Maintenance
90
Maintenance terms
Listed in this table are short explanations of the most important
maintenance terms.
Lubricant
Gear Oil and Grease used on this machine has to meet the following
requirements:
Task
Explanation
Greasing
Apply grease to the slide surfaces using a brush.
Lubrication
One or two presses of the grease gun, unless specified otherwise.
Oiling
Unless specified otherwise, use only plant-based oils, such as rapeseed oils.
The use of used oil will endanger your health and is also strictly prohibited.
Replacement
Replace the appropriate part in accordance with the instruction in the
Maintenance chapter.
Inspection
Check the tire pressures, adjustment dimensions and seal tightness as
required, and replace any worn parts or seals.
Observe the maintenance
intervals
The specifications relate to an average usage of the machine. If subjected to
heavier duty (e.g. by contracting companies), select the maintenance
intervals to be shorter. Also, for extreme working conditions (for example
heavy dust creation), shorter maintenance intervals are possible.
Lubricant
Specifications
Gear oil
SAE 90 API-GL-4 or 5
e.g.: KUBOTA HEAVY DUTY 80W-90 GEAR OIL
Grease
NLGI GC/LB
e.g.: KUBOTA Polyurea Grease
