background image

PERIODIC SERVICE

OPENING AND CLOSING OF

COVERS

1. Precautions for opening and

closing the covers

 WARNING

To avoid personal injury or death from contact with
moving parts:

• Never open the engine cover while the engine is

running.

• Do  not  touch  the  muffler  or  the  exhaust  pipes

while they are hot. Severe burns could result.

2. Opening and closing the engine

cover

1. Insert  the  starter  key  into  the  key  hole  and  turn  it

clockwise to unlock the engine cover.

2. Push the key hole.
3. Pull up the hood until it will be held.
4. To  close  the  engine  cover,  release  the  lock  of  the

gas damper.

5. Lower the hood and hold it down tightly.
6. Turn  the  starter  key  counterclockwise  to  lock  the

engine cover.

(1) Engine cover
(2) Key hole
(3) Gas damper
(4) Lock

(A) Open
(B) Close

3. Opening the side cover

1. Insert  the  starter  key  into  the  key  hole  and  turn  it

clockwise to unlock the side cover.

2. Pull up the side cover until it will be held.

OPENING AND CLOSING OF COVERS

 PERIODIC SERVICE

R540

95

Summary of Contents for R540



















































































































































Reviews:

Related manuals for R540