Kubota R540 Operator'S Manual Download Page 85

Page: 85 / 146

3. Move the auxiliary-port-variable-switch forward and

backward several times to release any hydraulic
pressure remaining in the circuits.

(1) Auxiliary port variable switch

HOW TO USE THE INCHING

AND BRAKE PEDAL

1. Operating the inching and brake

pedal

Operate the inching-and-brake-pedal as the procedures
in this section according to the application.

(1) Inching and brake pedal

(2) Accelerator pedal

To stop the machine

The inching-and-brake-pedal controls the HST pump
and brake.
1. To stop the machine completely during work, first

press the inching-and-brake-pedal slightly.
Oil flow from HST pump comes to 0 and cuts the
driving power to slow down or stop the machine.

2. Press the inching-and-brake-pedal completely.

The disc brake will be applied to stop the machine
completely.

(1) Inching and brake pedal

(A) Press with force

To approach slowly

1. Press the inching-and-brake-pedal slightly while

pressing the accelerator pedal.
The machine approaches slowly.

(1) Inching and brake pedal

(A) Press slightly

The machine can slowly approach an object by
accelerator pedal regulation only, without inching-
and-brake-pedal operation.

To scoop during digging

1. In case of the bucket does not raise up during

digging, press the inching-and-brake-pedal.
Traction force is reduced and lifting force is
increased, if the inching-and-brake-pedal is
pressed.

HOW TO USE THE INCHING AND BRAKE PEDAL

OPERATION OF THE MACHINE

R540

Summary of Contents for R540



















































































































































Search results

Summary of Contents for R540

Reviews:

Kubota R540, Operator'S Manual, Page: 85 / 146

Search results

Summary of Contents for R540

Reviews: