Kubota R540, Operator'S Manual, Page: 48 / 146

(1) Battery charge indicator
(2) Engine warning indicator
(red)
(3) Warning message
(A) Lighting
(B) Blinking
If the battery-charge-indicator stays on with the engine
running, stop the engine and check the fan belt.
(See Checking the fan belt tension on page 107)
(1) Fan belt
7. Warning indicator
The warning indicator indicates broken wire, short-
circuit, fuel shortage, and other problems.
IMPORTANT :
• Do not just look at the meter, but also inspect
and correct accordingly.
NOTE :
• The warning indicator starts flashing in red if a
serious problem occurs. If the system gets in
warning signal, the warning indicator starts
flashing in yellow.
• Warnings and errors are displayed and an alarm
buzzer beeps.
• Let your KUBOTA dealer inform you of details
concerning care and maintenance.
(1) Warning indicator (red)
(2) Warning message (A) Blinking
7.1 Overheat warning
1. If the coolant temperature becomes elevated, the
coolant-temperature-warning-indicator blinks and
the warning message
“E:9114”
appears on LCD as
long as the temperature remains elevated.
2. If the coolant temperature further increases, the
coolant-temperature-warning-indicator lights up, the
engine-warning-indicator blinks, and the warning
message
“E:9115”
appears on LCD as long as the
coolant temperature remains elevated.
Operate the machine only with reduced loads until the
operating temperature is normal again.
CHECKS BEFORE STARTING THE MACHINE CHECKS FOR THE INDICATORS
44
R540