Kubota R430, Operator'S Manual

Page: 70 / 112

PERIODIC SERVICE
OPENING AND CLOSING OF
COVERS
1. Precautions for opening and
closing the covers
WARNING
To avoid personal injury or death from contact with
moving parts:
• Never open the engine cover while the engine is
running.
• Do not touch the muffler or the exhaust pipes
while they are hot. Severe burns could result.
2. Opening and closing the engine
cover
1. Move the operator's seat backward.
2. Insert the starter key into the lock and turn it to
counter clockwise.
Then the lock is released.
3. Pull up the lever and lift the back-rest of the
operator's seat.
Then the engine cover will open.
4. To close the engine cover, lower the hood and hold
it down tightly.
5. Turn the starter key clockwise to lock the engine
cover.
(1) Starter key
(2) Lever (A) Pull
NOTE :
• When the engine cover is opened
completely, it will be automatically held by
gas damper.
3. Opening the document folder and
the magazine rack
You can store manuals or documents.
1. Open the magazine rack as follows.
(1) Magazine rack (A) Open
4. Opening the grease gun holder to
store the grease gun
You can store the grease gun on the right in the front
frame.
1. Set the body and the handle of the grease gun on
the grease-gun-holder, with the tip of the grease
gun facing forward.
(1) Grease gun
DAILY CHECK
It is extremely important to maintain your machine
properly to prevent trouble.
• Walk around the machine and carefully check all
hydraulic hoses and connections, the hydraulic
PERIODIC SERVICE OPENING AND CLOSING OF COVERS
66
R430