Kubota R430 Operator'S Manual Download Page 44 | Manualshive

Page: 44 / 112

background image

1. To lock the shuttle-change-lever, push the shuttle-

change-lever-lock-knob with the shuttle-change-
lever in the neutral position.

2. To unlock the shuttle-change-lever, pull the shuttle-

change-lever-lock-knob.

(1) Shuttle change lever lock

knob

(A) Lock
(B) Unlock

5. Control lever lock knob

Control-lever-lock-knob locks the control lever.

WARNING

To avoid personal injury or death:

• When dismounting the machine or when

servicing  the  machine,  be  sure  to  set  the
parking brake, stop the engine, lower the bucket
and  the  attachment  to  the  ground,  and  release
the  hydraulic  pressure  in  the  hydraulic  system
by  operating  control  levers.  Lock  all  control
levers in neutral, and remove the starter key.

1. To lock the control lever, push the control-lever-

lock-knob with the control lever in the neutral
position.

2. To unlock the control lever, pull the control-lever-

lock-knob.

(1) Control lever
(2) Control lever lock knob

(A) Lock
(B) Unlock

6. Auxiliary port lever lock knob

Auxiliary-port-lever-lock-knob locks the auxiliary-port-
lever.

WARNING

To avoid personal injury or death:

• When dismounting the machine or when

servicing  the  machine,  be  sure  to  set  the
parking brake, stop the engine, lower the bucket
and  the  attachment  to  the  ground,  and  release
the  hydraulic  pressure  in  the  hydraulic  system
by  operating  control  levers.  Lock  all  control
levers in neutral, and remove the starter key.

• In case of the auxiliary-port-lever is used for the

hydraulic-quick-coupler,

always

lock

the

auxiliary-port-lever  after  installing  the  front
attachment (bucket, and so on) to the hydraulic-
quick-coupler.  If  the  machine  is  operated
without  the  lock,  it  causes  serious  injury  or
death.

1. To lock the auxiliary-port-lever, push the auxiliary-

port-lever-lock-knob with the auxiliary-port-lever in
the neutral position.

2. To unlock the auxiliary-port-lever, pull the auxiliary-

port-lever-lock-knob.

(1) Auxiliary port lever
(2) Auxiliary port lever lock knob

(A) Lock
(B) Unlock

CHECKS BEFORE STARTING THE MACHINE

CHECKS FOR THE SAFETY LEVERS AND THE APPLIANCE

40

R430

«
...
42
43
44
45
46
...
»

Summary of Contents for R430

















































































































Reviews:

No comments

Related manuals for R430

Brand: H&S Pages: 22

Brand: Kellfri Pages: 24

Brand: Daedong Pages: 3

TOURINO PICK-UP

Brand: Cramer Pages: 16

Brand: HTI Pages: 6

Brand: gio Pages: 22

Sportsman 850 2014

Brand: Polaris Pages: 154

Brand: E-TON Pages: 35

Brand: E-Z-GO Pages: 66

Brand: Qlink Pages: 168

Brand: Landa Pages: 14

Brand: KEEWAY Pages: 97

Brand: Kellfri Pages: 8

Brand: Yamaha Pages: 154

Brand: North Star Pages: 6

Brand: North Star Pages: 9

Brand: Marlon Pages: 9

Brand: Jula Pages: 45

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands