52
MAINTENANCE
MAINTENANCE
B
Maintenance
To avoid personal injury or death:
A
Place the machine on the flat ground.
A
Before servicing or checking the machine, do
the following procedures.
A
Stop the engine.
A
Set the direction switch to the neutral
position.
A
Lower the bucket and attachment to the
ground.
A
Release the hydraulic pressure in the
hydraulic system. (For details, refer to
"HOW TO RELEASE PRESSURE TRAPPED
IN THE HYDRAULIC SYSTEM".)
A
Activate the hydraulic lock switch.
A
Remove the key.
A
Secure the articulation joint with the
steering frame lock.
A
Never get under the machine while it is being
lifted with only the bucket. If servicing or
checking underneath, support it firmly with
strong blocks, etc.
If you do not follow this instruction, serious
injury or death can result.
A
Keep clear of articulation area when servicing.
A
Keep sparks and naked flames away.
A
To avoid the danger of exhaust fume
poisoning, do not operate the machine in a
closed building without proper ventilation.
A
When servicing or checking the electrical
system, disconnect the battery cables.
A
Wear safety gear such as a hardhat, glasses
and safety shoes.
A
Do not carry out any work or modifications on
hydraulic components.
1. To safely use the machine and prevent any trouble
from occurring, be sure to conduct daily inspections
and periodic servicing.
2. The 12V socket can be used as a source of power for
illumination if you have to check the machine at night.
A
If the machine cannot be operated and must be towed,
please contact your local KUBOTA dealer for
information about correct towing procedures.
A
Major maintenance and service requires a specialist,
please contact your KUBOTA dealer.
A
Clean the machine so that it is easy to find what is
wrong.
A
Clean the parts of the hydraulic system and the oil
level gauge in particular to keep them free of dust and
other foreign matter.
A
When washing, be careful not to get the electrical parts
wet.
A
Check or replenish the oil in a place where there is little
dust and use a clean oil container to prevent dust from
permeating the oil.
A
Check or replenish oil when the machine is level.
Use the same brand when replenishing oil.
A
After greasing the machine, wipe off all old grease,
especially from those parts where sand and dust can
accelerate wear.
A
When changing the oil check whether the old oil is
abnormally permeated with metal fillings or foreign
matter.
A
Only use commercially available, noncombustible
washing agents. Only wash at the designated places
(oil, grease traps available).
(1) Power socket 12V
Summary of Contents for R065
