Kubota M7131, Operator'S Manual

Page: 54 / 298

INTELLIPANEL(TM) CONTROL 22
LIQUID CRYSTAL DISPLAY
This display provides the operator with a variety of information necessary to operate the tractor. Further, part of the display
can be modified by the operator as required.
No. Description
Reference
page
(1)
[Power shift model]
Auto shift mode
(Field mode)
Auto shift mode
(Road mode)
Manual mode
(A) Displays A, B, C, D, E or F
Displays the position of the range gear shift that was selected with the ez-
command center.
(B) Displays 1, 2. 3 or 4
Displays the position of the main gear shift selected with the ez-command
center.
(C) Auto shift mode indicator
Lights up when the auto shift mode is selected. Stays off while in the manual
mode.
(D) Auto-shift bar indicator
Displays the automatic gear shift range (1 thru 4) that was preset with the
main gear shift (1 thru 4) in the field mode, as well as the current gear ratio.
Lights up when the field mode is selected. Stays off while in the manual mode.
C
Example of Auto-shift bar display
(1) The current speed is the highest position of the set speeds.
The load and the set speed are in balance.
(2) The current speed is shifted 2 speeds down from the highest position.
(3) The current speed is shifted 3 speeds down from the highest position.
(E) Auto-shift indicator
Displays the automatic gear shift range (A1 thru B4) that was preset with the
main gear shift (1 thru 4) and the range gear shift (A thru F) in the road mode.
Lights up when the road mode is selected. Stays off while in the manual
mode.
26
51
113