Kubota M7131, Operator'S Manual

Page: 236 / 298

PERIODIC SERVICE 204
B
Inspecting the DEF/AdBlue® level and
adding the fluid
To avoid personal injury or death:
A
Before adding DEF/AdBlue®, stop the engine.
When adding the fluid, preferably wear
protective goggles and rubber gloves.
Look at the DEF/AdBlue® gauge on the instrument panel
to see how much fluid remains. If the level is too low, add
DEF/AdBlue® as required.
Before removing the DEF/AdBlue® cap, clean dirt away
from the caps and the tank openings.
If the fluid runs short or poor-quality fluid is added, a
warning sign appears on the instrument panel. If this
warning is ignored and the operation continues, the
engine output will be limited.
(For details, refer to "Warning Indication and its
Countermeasure" in "SELECTIVE CATALYTIC
REDUCTION (SCR) MUFFLER" in "OPERATING THE
ENGINE" section.)
The DEF/AdBlue® tank cap is blue. Be careful not to
confuse it with the fuel tank cap.
A
Use exclusively DEF/AdBlue® that complies with the
requirements of ISO 22241-1.
A Do not allow fuel, oil or the like to enter the DEF/
AdBlue ® tank.
If any other substance (gasoline/diesel/oil) is
mistakenly introduced into the DEF/AdBlue® tank, do
not attempt to start the engine and contact your local
KUBOTA dealer as soon as possible.
A
Check the DEF/AdBlue ® gauge regularly to avoid
emptying its tank.
A
If the DEF/AdBlue ® spills, wipe it with water. If spills
are not wiped, metal areas will rust and the aluminum
areas will corrode.
(1) DEF/AdBlue® tank
(2) Tank cap (Blue)
(1) DEF/AdBlue® gauge
(2) DEF/AdBlue® warning indicator
(3) DEF/AdBlue® system warning indicator
(1) Drain plug
Tank capacity 38 L