Kubota M7131, Operator'S Manual

Page: 132 / 298

OPERATING THE TRACTOR 100
B
Light Switch
[without repeat headlight type]
1. Turn the key to the "ON" position.
2. In accordance with the switch positions, the lights in
the table below light up.
C Headlight beam selection lever
The headlight switches between low and high beam each
time you move the lever to the B position. When the
headlight is on low beam, it will flash when the lever is
moved to the A position.
A
High beam indicator will be on when selection lever is
in "high beam" position.
A To prompt the operator to turn off the lights, the buzzer
starts sounding if the key is turned to off position with
lights on.
B
Light Switch
[with repeat headlight type]
1. Turn the key to the "ON" position.
2. In accordance with combinations of the switches 1 and
2, the lights in the table below light up.
C
Headlight beam selection lever
The headlight switches between low and high beam each
time you move the lever to the B position. When the
headlight is on low beam, it will flash when the lever is
moved to the A position.
(1) Switch (3 positions) (A) "PUSH"
Switch position
All lights off (a) position
Position light on (b) position
Headlight/position light on (c) position
(1) Headlight beam
selection lever
(A) "Flash" (on low beam)
(B) "Low/high beam switch"
(1) Switch 1 (3 positions)
(2) Switch 2 (2 positions) (A) "PUSH"
Switch position
Switch 1 Switch 2
All lights off (a) position --
Position light on (b) position --
Headlight/position light on (c) position (d) position
Repeat headlight/position
light on
(c) position (e) position
(1) Headlight beam
selection lever
(A) "Flash" (on low beam)
(B) "Low/high beam switch"