Kubota M7-132, Operator'S Manual

Page: 76 / 332

3.1 Modifying the information displayed on
the basic information monitor
1. Stop the tractor and apply the parking brake.
The display cannot be changed while driving. Trying
to make a change while driving will activate the
warning buzzer.
2. Turn on the key switch.
3. Press the
[Select] switch to choose “Basic
information monitor” (it is highlighted). Then press
the [ENT] switch.
(1) [Select] switch
(2) [SET UP/00] switch
(3) [ENT] switch
(4) [ESC] switch
(1) Basic information monitor
4. Every time the [Select] switch is pressed, the
onscreen data switches among “Hour meter” , “Trip
A” , “Trip B” , and “Clock” in that order.
5. Press the [ENT] switch, and the data now on the
screen are finalised.
3.2 Modifying the information to display on
the performance monitor
1. Stop the tractor and apply the parking brake.
The display cannot be changed while driving.
Trying to make a change while driving will activate
the warning buzzer.
2. Turn on the key switch.
3. Press the
[Select] switch to choose “Performance
monitor (1)” (it is highlighted). Then press the [ENT]
switch. Now the performance monitor select screen
shows up.
(1) [Select] switch
(2) [SET UP/00] switch
(3) [ENT] switch
(4) [ESC] switch
(1) Performance monitor 1
(2) Performance monitor 2
INTELLIPANEL
™
CONTROL LIQUID CRYSTAL DISPLAY (LCD)
70
M7132, M7152, M7172