Kubota M7-132, Operator'S Manual

Page: 70 / 332

(1) [SET UP/00] switch
(2) [Select] switch
(3) [ENT] switch
(4) [ESC] switch
3. Select “Auto shift (road mode)” with the [Select]
switch and then press the [ENT] switch.
The auto shift (road mode) setting screen shows
up.
(1) Auto shift (road mode)
(2) Auto shift (field mode)
4. Select with the [Select] switch and then press
the [ENT] switch to choose the “Range gear shift of
minimum travelling speed” (highlighted).
5. Select or with the [Select] switch and then
press the [ENT] switch to determine the desired
“Range gear shift of minimum travelling speed”
(from A to E).
6. Select with the [Select] switch and then press
the [ENT] switch to choose the “Main gear shift of
minimum travelling speed” (highlighted).
(1) Range gear shift of minimum travelling speed
(2) Main gear shift of minimum travelling speed
(3) Range gear shift of maximum travelling speed
(4) Main gear shift of maximum travelling speed
7. Select or with the [Select] switch and then
press the [ENT] switch to determine the desired
“Main gear shift of minimum travelling speed” (from
1 to 6).
8. Use the same procedure to determine “Range gear
shift and main gear shift of maximum travelling
speed”
.
9. Select [SET] with the [Select] switch and then
press the [ENT] switch. The setting is made and
the setting mode screen appears again.
2.2 Setting the automatic gear shift (field
mode)
Referring to the travelling speeds chart, determine the
maximum and minimum main gear shifts that are best
suited for the job in question.
1. Turn on the key switch.
2. Press the
[SET UP/00] switch to make the setting
mode screen appear.
(1) [SET UP/00] switch
(2) [Select] switch
(3) [ENT] switch
(4) [ESC] switch
3. Select “Auto shift (field mode)” with the [Select]
switch and then press the [ENT] switch. The auto
shift (field mode) setting screen shows up.
INTELLIPANEL
™
CONTROL LIQUID CRYSTAL DISPLAY (LCD)
64
M7132, M7152, M7172