(1) Lift arm top limit adjustment switch
(2) Lift arm top limit control
(3) Lift arm bottom limit control
(4) Lift arm height control, current position (height)
10. 3-point hitch lowering speed
adjustment
Adjust to the lowering speed suited for the implement in
use.
WARNING
To avoid personal injury or death:
• A fast lowering speed may cause damage or
injury. The lowering speed of the implement
should be adjusted to 2 or more seconds.
For Standard model:
1. Turn the dial in the
“FAST”
direction, and the 3-point
hitch’s lowering speed will increase.
2. Turn the dial in the
“SLOW”
direction, and the 3-
point hitch’s lowering speed will decrease.
(1) 3-point hitch lowering speed
adjustment dial
“FAST”
“SLOW”
For Premium, Premium KVT models:
1. Using the (+) and (-) switches, the setting can be
changed.
• The longer the bar graph is extended rightward,
the further will the 3-point hitch’s lowering speed
increase.
• The more the bar graph is shortened leftward,
the further will the 3-point hitch’s lowering speed
decrease.
Details regarding the setting procedure can be
found in a different section.
(See Setting the 3-point hitch on page 85.)
(1) 3-point hitch lowering speed control
(2) 3-point hitch lowering speed adjustment switch
11. 3-point quick raise and lower
switches
These switches are used to raise and lower the
implement. This facilitates turning in the field.
WARNING
To avoid serious injury or death:
• Before road travelling, be sure to lock the
implement with the 3-point hitch lock button.
If travelling with the ride control on, unlock the
3-point hitch lock button.
• Do not use the 3-point quick raise and lower
switch on road travelling.
• When an implement is changed, do not use the
3-point quick raise and lower switch before
checking the full range of operation for
interference using the depth control dial.
1. Press the
“RAISE”
switch, the 3-point lifting and
lowering indicator lights up and the implement goes
up.
HYDRAULIC UNIT
3-POINT HITCH CONTROL SYSTEM
218
M7132, M7152, M7172
Summary of Contents for M7-132
