Kubota M7-132, Operator'S Manual

Page: 205 / 332

1.2 PTO rpm display
The front PTO rpm and rear PTO rpm can be displayed
on the LCD screen on the instrument panel.
(1) Front PTO rpm
(2) Rear PTO rpm
For Premium, premium KVT models only:
The front PTO rpm and rear PTO rpm can be displayed
on the K-monitor screen.
(See Setting the PTO on page 92.)
(1) Front PTO indicator
(2) Front PTO rpm
(3) Rear PTO indicator
(4) Rear PTO rpm
2. PTO shaft cover and shaft cap
Keep the front PTO shaft cover in place at all times. Put
back the PTO shaft cap when the PTO is not in use.
Before connecting or disconnecting a drive shaft to
PTO shaft, be sure engine is
“OFF” .
(1) PTO shaft cover
(2) PTO shaft cap
IMPORTANT :
• The universal joint of the PTO drive shaft is
technically limited in its moving angle. Refer to
the PTO drive shaft instructions for proper use.
FRONT PTO OPERATION (IF EQUIPPED) PTO
M7132, M7152, M7172
199