Kubota M7-132, Operator'S Manual

Page: 173 / 332

2. The automatic gear shifting will be within the preset
main gear shift range.
Details regarding relevant settings can be found in
a different section.
(See Setting the engine and power shift
transmission (
Premium model only) on page 93.)
(1) Selected travelling speed
gear shift
(2) Previous screen resume
switch
(3) Low-speed setting switch
(4) High-speed setting switch
(5) High-speed slider
(6) Low-speed slider
(7) Main gear shift section (1 to
6)
NOTE :
• The automatic gear shift range in the field
mode may be preset only for the main gear
shift.
• Suppose that while the machine is running,
the travelling speed is increased or
decreased out of its preset range with the
ez-command center. When this happens, the
manual mode is resumed. To go back to the
auto shift mode, get the travelling speed
back into the preset range and press the
auto shift button again.
3.6 Setting the range gear shift in the field
mode (Premium model)
1. The range gear shift consists of 5 speeds.
Determine the range gear shift range that is best
suited for the working speed.
2. Hold down the range gear shift button and push the
ez-command centre forward, and the range gear
shift goes up. Pull this lever backward, and this shift
comes down.
Before setting the range gear shift in the field mode,
bring the tractor to a complete stop.
The selected range gear shift stage can be checked
with the LCD indicator on the instrument panel.
(1) Ez-command centre
(2) Range gear shift button (X) “Shift up”
(Y) “Shift down”
4. Operating in the manual mode
To operate the machine in the manual mode, it is
necessary to switch from the auto shift mode to the
manual mode.
1. Hold down the auto shift button to select the
“manual” mode.
POWER SHIFT TRANSMISSION CONTROL OPERATING THE TRACTOR
M7132, M7152, M7172
167