Kubota M7-132, Operator'S Manual

Page: 121 / 332

Icon Meaning Unit Remark
Trip-work area covered
per hour ha/h
(a/h)
Resettable
Trip-idle time -
Resettable
(engine
running,
tractor not
moving,
PTO off)
12.4 Setting the operating conditions and
beginning recording
The operating conditions for which you want to record
data can be set with the 6 switches at bottom right of
the screen, and once set can be confirmed with
indicators (9) through (14).
Simultaneous setting of multiple switches for operating
conditions is also possible, but when setting for two
conditions or more, data will be recorded when at least
one condition has been met.
After setting, touch the record start switch (1) to begin
recording, and the record stop switch (2) to end
recording.
(1) Record start switch
(2) Record stop switch
(3) Lift arm switch
(4) External signal input switch
(5) Remote control valve switch
(6) Front PTO switch
(7) Rear PTO switch
(8) Porgress switch
(9) Lift arm indicator (10) External signal input indica-
tor
(11) Remote control valve indica-
tor
(12) Front PTO indicator
(13) Rear PTO indicator
(14) Front wheel drive (4WD) in-
dicator
Lift arm
Touch the switch to switch the indicator among “Lift arm
raise” , “Lift arm lower” and “OFF” .
• When you select “Lift arm raise” , data will be
counted only when the lift arm is raised.
• When you select “Lift arm lower” , data will be
counted only when the lift arm is lowered.
External signal input
Touch the switch to switch between the “ON” (lit) and
“OFF” (unlit) indicators.
• When you select external signal input ON, data will
be counted only during external signal input.
For details, consult your local KUBOTA Dealer.
Remote control valve
Touch the switch to switch the indicator among
“Remote control valve” 1 through 6 and OFF (unlit), in
that order.
• When you select “Remote control valve 1” , data will
be counted only when valve 1 is operating.
Front PTO
Touch the switch to switch between the “ON” (lit) and
“OFF” (unlit) indicators.
• When you select “Front PTO ON” , data will be
counted only when the front PTO is rotating.
Rear PTO
Touch the switch to switch between the “ON” (lit) and
“OFF” (unlit) indicators.
• When you select “Rear PTO ON” , data will be
counted only when the rear PTO is rotating.
Progress
Touch the progress switch to switch between the “ON”
(lit) and “OFF” (unlit) indicators.
• When you select “Progress” , data will be counted
only when the tractor is in progress.
12.5 Record status indicators
Record status indicators use the following colours for
identification.
• Amber indicator lit: data is being recorded (counted)
• Green indicator lit: data recording interrupted
• Indicators off: data recording stopped
(1) Counting status indicator
(2) Lift arm indicator
(3) External signal input indica-
tor
(4) Remote control valve indica-
tor
(5) Front PTO indicator
(6) Rear PTO indicator
(7) Progress indicator
K-MONITOR MAIN MENU ( PREMIUM AND PREMIUM KVT MODEL ONLY) INTELLIPANEL
™
CONTROL
M7132, M7152, M7172
115