Kubota M6H-101, Operator'S Manual

Page: 97 / 202

4. To complete the setting, select
“Set”
with the select
switch.
The various setting mode screen appears again.
1.4 Setting the unit
1. Press the mode selector switch to choose “Unit
setting” . Then press the select switch, and the unit
setting screen appears.
(1) Unit setting
(1) Unit setting screen
2. Press the select switch to select
“Inch”
or
“cm”
.
3. Press the mode selector switch.
4. To complete the setting, select
“Set”
with the select
switch.
The various setting mode screen appears again.
1.5 Setting the PTO speed display
Whenever the PTO speed is changed to the other
speed, it is necessary to switch the PTO speed display
mode. Otherwise, the PTO speed will not be correctly
displayed in the LCD monitor. When the PTO speed is
changed from 540 rpm to 1000 rpm or from 1000 rpm
to 540 rpm, it is necessary to switch the PTO speed
display mode.
NOTE :
• The current setting can be checked in the
following procedure.
1. Press the mode selector switch to choose “PTO
speed display setting” .
Then press the select switch, and the PTO speed
display setting screen appears.
(1) PTO speed display setting
(1) PTO speed display setting screen
2. According to the following table, press the select
switch to select the PTO speed.
Select the model PTO speed (rpm)
540 540
1000 option 1000
3. Press the mode selector switch.
4. To complete the setting, select
“Set”
with the select
switch.
The various setting mode screen appears again.
LCD MONITOR OPERATING THE TRACTOR
M6S-111,M6L-111,M6H-101
91