Kubota M6H-101, Operator'S Manual, Page: 172 / 202

3. Fill with new oil up to the upper notch on the
dipstick.
(See LUBRICANTS, FUEL AND COOLANT on
page 140.)
Oil capacity with filter 10.7 L (11.3 U.S.qts.)
All models
(1) Oil inlet
(2) Dipstick (A) Oil level is acceptable within
this range
M6S-111 and M6L-111
(1) Drain plug
M6H-101
(1) Drain plug
2. Replacing engine oil filter
WARNING
To avoid personal injury or death:
• Be sure to stop the engine before changing the
oil filter cartridge.
• Allow the engine to cool down sufficiently; oil
can be hot and can burn.
1. Remove the oil filter.
2. Put a film of clean engine oil on the rubber seal of
the new filter.
3. Tighten the filter quickly until it contacts the
mounting surface.
Tighten the filter by hand an additional 1/2 turn only.
PERIODIC SERVICE EVERY 500 HOURS
166
M6S-111,M6L-111,M6H-101