Kubota M6H-101, Operator'S Manual, Page: 171 / 202

(1) O ring
(2) Element
(3) Element cup
(4) Red float
(5) Cup
(6) Drain plug
(7) Water sensor connector
IMPORTANT :
• If the water separator and/or fuel filter is not
well maintained, the supply pump and
injector may be damaged earlier than
expected.
2. Lubricating grease fitting
(M6S-111 2WD only)
1. Detach the cover, and apply bearing grease.
(1) Front wheel hub cover
EVERY 500 HOURS
1. Changing engine oil
WARNING
To avoid personal injury or death:
• Be sure to stop the engine before changing the
oil.
• Allow the engine to cool down sufficiently; oil
can be hot and can burn.
1. To drain the used oil, remove the drain plug at the
bottom of the engine and drain the oil completely
into the oil pan.
2. After draining, reinstall the drain plug.
EVERY 400 HOURS PERIODIC SERVICE
M6S-111,M6L-111,M6H-101
165