Kubota M6H-101, Operator'S Manual

Page: 170 / 202

M6H-101
(1) Fuel tank (both sides, RH not shown in illustration)
(2) Drain plug
IMPORTANT :
• If the fuel contains impurities, such as water,
drain the fuel tank at shorter intervals.
• Drain the fuel tank before operating the tractor
after a long period of storage.
EVERY 400 HOURS
1. Cleaning water separator
This job should not be done in the field, but in a clean
environment.
1. Disconnect the water sensor connector.
2. Close the fuel shutoff-valve.
3. Unscrew the cup and remove it, then rinse the
inside with kerosene.
4. Take out the element and dip it in the kerosene to
rinse.
5. After cleaning, reassemble the water separator,
keeping out dust and dirt.
6. Connect the water sensor connector.
7. Bleed the fuel system.
(See Bleeding fuel system on page 181.)
M6S-111
(1) Water sensor connector
(2) Fuel shutoff-valve
(3) Cup (A) “CLOSE”
M6L-111
(1) Water sensor connector
(2) Fuel shutoff-valve
(3) Cup (A) “CLOSE”
M6H-101
(1) Water sensor connector
(2) Fuel shutoff-valve
(3) Cup (A) “CLOSE”
PERIODIC SERVICE EVERY 400 HOURS
164
M6S-111,M6L-111,M6H-101