Kubota M6H-101, Operator'S Manual

Page: 139 / 202

3. Rear wheels
Rear tread width can be adjusted, as shown, with the
standard or optional equipped tires.
To change the tread width:
1. Remove the clamp mounting bolts.
2. Change the clamp position of the rim and disc to
the desired position, and tighten the bolts.
IMPORTANT :
• Always attach wheels as shown in the drawing.
• If not attached as illustrated, transmission parts
may be damaged.
• When re-fitting or adjusting a wheel, tighten the
bolts to the following torques then recheck after
driving the tractor 200 m (200 yards) and 10
times of shuttle movement by 5 m (5 yards), and
thereafter according to service interval.
(See MAINTENANCE on page 137.)
Standard tire Option tire
13.6-38
(Front and rear:
steel disc)
9.5R48
12.4R46
13.6-38
(Front: steel
disc)
(Rear: cast iron
disc)
(1) 260 to 304 N
⋅
m / 26.5 to 31 kgf
⋅
m / 192 to 224 ft
⋅
lbs
(2) 368 to 402 N
⋅
m / 37.6 to 40.9 kgf
⋅
m / 272 to 296 ft
⋅
lbs
N ⋅ m (kgf ⋅ m) [ft ⋅ lbs]
WHEEL ADJUSTMENT TIRES, WHEELS, AND BALLAST (M6H-101)
M6S-111,M6L-111,M6H-101
133