(1) Hole set 1 (selection example)
(2) Hole set 2
(3) Hole set 3
4. Draft stopper
To reduce the vibrations of attachments, set the draft
stopper to the
“LOCK”
position.
When using the draft control for plowing and similar
operations, set the draft stopper to the
“UNLOCK”
position.
(1) Draft stopper
(A) “LOCK”
(B) “UNLOCK”
5. Drawbar
Remove the drawbar if a close mounted implement is
attached.
6. Lifting rod (left)
WARNING
To avoid personal injury or death:
• Do not extend lifting rod beyond the groove on
the thread rod.
By turning the rod itself, the lifting rod changes its
length. When extending the rod, do not exceed the
groove on the rod thread.
(1) Lifting rod
(A) “GROOVE”
7. Lifting rod (right)
WARNING
To avoid personal injury or death:
• Do not extend lifting rod beyond the groove on
the thread rod.
1. To adjust the length of the lifting rod, lift the
adjusting handle and turn to desired length.
2. After adjusting, lower the lifting rod adjusting handle
to the lock position.
3-POINT HITCH SETUP
3-POINT HITCH AND DRAWBAR
M6S-111,M6L-111,M6H-101
107
Summary of Contents for M6H-101
