Kubota M5660SUH, Operator'S Manual, Page: 92 / 117

PERIODIC SERVICE 70
B
Checking Tie-rod Dust Cover
1. Check to see that dust covers are not damaged.
2. If dust covers are damaged, consult local KUBOTA
Dealer for this service.
A If dust covers are cracked, water and dust invade into
tie-rod and it will be early wear.
EVERY 100 HOURS
B
Lubricating Grease Fittings
Apply a small amount of multipurpose grease to the
following points every 100 hours:
If you operated the machine in extremely wet and muddy
conditions, lubricate grease fittings more often.
N-m (kgf-m) [ft-lbs.]
(1) (2) (3) (4)
2WD
168 to 196
(17.1 to 20.0)
[124 to 145]
---
260 to 304
(26.5 to 31.0)
[192 to 224]
244
(24.9)
[180]
4WD
260 to 304
(26.5 to 31.0)
[192 to 224]
244
(24.9)
[180]
(1) Dust cover
(1) Grease fitting (Knuckle shaft) [RH, LH]
(1) Grease fitting (Front axle support)
(1) Grease fitting (Front axle support)