Kubota M5-091, Operator'S Manual

Page: 94 / 176

HYDRAULIC UNIT 70
A Full adjustment of the valve will occur in approximately
1 1/2 revolutions of the flow control knob. Turning the
flow control knob beyond this point will have no affect
on the flow rate.
A
When there is no need to adjust the flow rate, turn the
flow control knob all the way counterclockwise and
keep it in this position.
B Positions and advantages of the flow
control valve
Refer to illustration below.
C
Position 1
1. The attachment control speed (hydraulic motor RPM,
for example) of the remote control valve (1) can be
maintained at a constant level within limits.
2. The remote control valve (1) and the 3-point hitch can
be operated at the same time. The 3-point lift speed
will be influenced by the level of flow required at
remote control valve (1).
C Position 2
1. The attachment control speed (hydraulic motor RPM,
for example) of the remote control valve (2) can be
maintained at a constant level.
2. The remote control valve (2) and the 3-point hitch can
be operated at the same time with the speed of the 3-
point being influenced by the adjustment range of the
flow control valve.
3. Remote control valves (1) and (2) can be operated at
the same time with operation of the 3-point hitch being
interrupted by activation of valve (1).
4. The operation of valve (1) is influenced by the flow
adjustment to valve (2).
5. The 3-point hitch lift speed and the flow available for
valve (1) are influenced by the flow adjustment of valve
(2).
(1) Remote control valve (1)
(2) Remote control valve (2)
(3) Flow control valve
(4) Flow control knob (A) "INCREASE"
(B) "DECREASE"
(C) "STOP"
(1) Remote control valve (1)
(2) Flow control valve
(1) Remote control valve (1)
(2) Remote control valve (2)
(3) Flow control valve