![background image](http://html.mh-extra.com/html/kubota/la535/la535_operators-manual_2008669042.webp)
14. Hook the hoses on the side frame and attach the
protective plugs to their respective couplers as
shown below.
(1) Hoses
(2) Mount pin
(3) Protective plugs
NOTE :
Confirm the following points.
• The hoses are out of contact with the front
wheel.
• Dirt does not come in contact with the
couplers, and there is no oil leakage.
15. Place the protective caps on the quick coupler
ends.
(1) Protective caps
16. Start the engine and slowly back the tractor away
from the loader.
2. Removing Swift-Tach loader [if
equipped]
WARNING
To avoid personal injury or death:
If you do not get off the tractor while removing or
reinstalling the loader;
• Stop the engine before operating the mounting
lever.
• Get off the tractor when you feel uneasy to do
some operation.
1. Raise the boom until the bucket pivot pin is the
height of the boom pivot pin.
2. Dump the bucket fully.
(1) Bucket pivot pin
(2) Boom pivot pin
(A) Same height
3. Slide the stand lever downward completely and
release the loader storage stands by unlocking.
(1) Stand lever
(2) Stand
(3) Stand hook
REMOVING THE LOADER
HOW TO REMOVE THE LOADER
38
LA535
Summary of Contents for LA535
Page 4: ......
Page 10: ...SAFETY LABELS SAFE OPERATION 6 LA535 ...
Page 11: ...SAFE OPERATION LA535 7 ...
Page 57: ... A Top of bolt B Length REINSTALLING THE LOADER LA535 53 ...