Kubota LA463, Operator'S Manual

Page: 22 / 40

PRE-OPERATION CHECK 10
B
4 Position bucket control valve type
This control valve has two stage dump positions. The first
dump position by moving the lever to the right features
greater speed for dumping.
The second dump position (to further right) is the
"Regular" dump position. It has good power and control
for dumping precisely. This position should be used when
operating another implement with this control valve.
These two positions are separated by a "Feel" position for
your convenience.
REMOVING AIR FROM THE HYDRAULIC
SYSTEM
Repeat raising and lowering the boom and bucket
operations until all the air is removed from the system and
the system responds properly.
A Do not move the control lever into the float position
when the bucket is off the ground.