115
PERIODIC SERVICE OF THE TRACTOR
EVERY 600 HOURS
B
Adjusting Front Axle Pivot
If the front axle pivot pin adjustment is not correct, front
wheel vibration can occur causing vibration in the steering
wheel.
C
Adjusting procedure
Loosen the lock nut, screw-in the adjusting screw until
seated, then tighten the screw with an additional 1/6 turn.
Re-tighten the lock nut.
EVERY 800 HOURS
B
Adjusting Engine Valve Clearance
Consult your local KUBOTA Dealer for this service.
EVERY 1000 HOURS or 1 YEAR
B
Replacing Air Cleaner Primary Element
and Secondary Element
(See "Cleaning Air Cleaner Primary Element" in "EVERY
100 HOURS" section.)
EVERY 1500 HOURS
B
Checking Fuel Injection Nozzle Injection
Pressure
Consult your local KUBOTA Dealer for this service.
B
Replacing Oil Separator Element
To avoid personal injury or death:
A
Be sure to stop the engine before replacing the
oil separator element.
1. Remove the cover and take out the element. Wipe off
oil and the carbon in the case with a clean rag.
2. Fit a new oil separator element.
3. Tighten the cover.
B
Checking PCV (Positive Crankcase
Ventilation) Valve
Consult your local KUBOTA Dealer for this service.
(1) Filling plug with dipstick
(2) Drain plug
(A) Oil level is acceptable within
this range
(1) Adjusting screw
(2) Lock nut
Be sure to do the following servicing once every 1000
hours or yearly, whichever comes first.
(1) Oil separator
(2) Body
(3) Oil separator element
(4) Gasket
(5) Cover
Summary of Contents for L47TL
