Kubota L4701, Operator'S Manual

Page: 82 / 142

3. Mixed control of position and draft
of 3-point hitch mounted implement
In draft control, when draft decreases, the implement
automatically lowers to increase draft. However, the
implement sometimes lowers too much.
To limit the degree to which the implement can be
lowered, set the position-control-lever at the lowest
working depth desired for the implement. Lower the
draft-control-lever to the point where the implement is
at the desired depth.
Setting the position-control-lever and the draft-control-
lever stops the implement from going too deep and
causing loss of traction and ground speed.
(1) Ground surface
(2) Implement penetration limit
(3) Light soil
(4) Position control lever
(5) Draft control lever (if equip-
ped)
(A) Up
(B) Down
(C) Sensitive
(D) Insensitive
4. Float control of lower link
With draft control (if draft control lever is equipped)
Place both the draft-control-lever and the position
control lever in the float position to move the lower links
freely along with the ground conditions.
(1) Position control lever
(2) Draft control lever (A) Float
HYDRAULIC UNIT 3-POINT HITCH CONTROL SYSTEM
78
L4701